battery operated candles for windows with timers

by leijianjun
How to open the Candle?
Take off the battery save insulating tab from the remote
Turn clockwise switch on the bottom to ON. The candle will open until       
     
       
you manually turn counter clockwise the switch to OFF. 
ON-OFF button:
Open the Candle On=Off(Note:Before you use the Remote Control, switch the 
ON-OFF button to ON at the buttom of the LED candles)
MODE: 
There are two modes for the candle light. 
between flicker mode and steady light.candle mode for flicker,
 light mode  for not flicker . 
the remote at the candles and pressing the "Candle" button. 
Press "Candle" to get flickering light and
press" Light" to get steady light.       
Dimmer:
2 adjustment: Use these two dimmer buttons to change the brightness of the   
candle.Each dimmer.button could be change light brightness by twice.
Left button to lower the brightness Right button to increase brightness.
If the flame doesn't flickering after you press "light" button, press + to
increase .brightness to maximum
Back to News